A direct mount for micro red dot sights on the P99FS

This part is for directly mounting the Tokyo Marui Micro Pro Sight onto the Maruzen P99FS.
It is 3D printed using black resin.
The part includes two nuts for attaching the Micro Pro Sight.

To install, this product will be adhered to the P99FS slide.
Before adhering, lightly sand the painted surface of the slide. We recommend using a strong rubber-based adhesive like Super X.
(Cemedine Super X Black is recommended: ttps://amzn.to/3ARyfR3)
Adhesives that harden rigidly, such as JB Weld, may peel off due to repeated deformation during use.
Once adhered, attach the Micro Pro Sight using its genuine mounting screws.

Since the Micro Pro Sight uses the Doctor standard, other optics with the Doctor standard may also be mountable. However, you may need to prepare your own mounting screws separately (as some may use inch-standard screw pitches).
In such cases, please use M3 metric screws.

Additionally, as shown in the fourth photo, a groove has been shaped to function as iron sights.
This is designed so that you can still use iron sights even if the Micro Pro Sight is removed, as this part is permanently adhered to the slide.

*Please note that this product is made of resin and may break if impacted.
*We are not responsible for any incidents, such as the mount breaking and causing optics to fall.
*As this is a resin 3D print, layer lines and support marks may be present. Please smooth them out with sandpaper.
*The contents include only the mount part and two nuts. The P99 body and Micro Pro Sight shown in the product photos are not included.
*The product will be delivered unpainted. If desired, you can paint it with a matte black spray paint.