Kodak Charmera Hot Shoe Mount Case (3-Pack)

This is a case for attaching the Kodak Charmera to a camera's hot shoe.
It was originally designed and produced for personal use, but we are listing it in the hope that it will be useful to others with similar needs.

[Product Features]
- Allows access to the Kodak Charmera's power button, shutter button, USB port, and keychain hole while the case is attached.
- Made with PETG resin, which has higher heat resistance than general PLA resin (approximate heat resistance: 69°C), assuming outdoor use.
- Comes as a set of 3 different lengths (to be used depending on the lens length of your mirrorless camera).
- Printed with 100% infill for prioritized strength.
- Manufactured with a Bambu Lab 3D printer.
- The hot shoe part is designed based on the ISO 518 standard (please also check the notes below).

[Contents]
- Mount Low x 1
- Mount Medium x 1
- Mount High x 1

[How to Use]
1. Attach the Kodak Charmera to this product.
2. Attach this product to your camera's hot shoe.

[Notes]
- Kodak Charmera / Mirrorless camera body is not included.
- May break if subjected to strong impact such as collision or dropping while attached. Please handle with care.
- As this is a 3D printed product, there may be visible layer lines and slight individual differences.
- Depending on the shape and tolerance of the hot shoe side, and individual differences, the fit (tight/loose) may vary. Please adjust by applying tape, etc.
- We are continuously improving the product. The design may differ from the photos depending on the purchase date.
- May deform in high-temperature environments (e.g., inside a car on a hot day). Please be mindful of storage and usage environments.

[Disclaimer]
We are not responsible for any damages or losses incurred from the use of this product. Please understand this in advance.

Thank you for viewing until the end.
We hope it will be useful to you. We sincerely look forward to your purchase.